Dell PowerEdge M420 Owner's Manual page 111

Error Code Message Information
VLT0200
VLT0201
VLT0202
VLT0203
Downloaded from www.Manualslib.com
2. Remove the processor module. Inspect processor socket for bent pins.
3. If the issue persists, see
Message The system board <
LCD Message System board voltage is outside of range.
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for bent pins.
3. If the issue persists, see
Message The system board <
LCD Message System board voltage is outside of range.
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
Message The system board <
LCD Message System board voltage is outside of range.
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
Message The system board <
LCD Message System board voltage is outside of range.
Details System hardware detected an over voltage or under voltage condition.
manuals search engine
Getting Help.
name > voltage is less than the lower critical threshold.
Getting Help.
name > voltage is less than the lower warning threshold.
Getting Help.
name > voltage is greater than the upper warning threshold.
Getting Help.
name > voltage is greater than the upper critical threshold.
111