Dell PowerEdge M420 Owner's Manual page 80

Error Code Message Information
HWC5006
HWC5008
HWC5010
HWC5014
HWC5031
HWC5032
HWC5034
HWC5036
HWC6000
HWC6002
80
Downloaded from www.Manualslib.com
Action Update the CMC firmware. If the issue persists, see
Message A failure is detected on <
Action If the issue persists, see
Message Console is not available for the <
Action If the issue persists, see
Message < name > cannot detect any hosts.
Action If the issue persists, see
name > is not functional and is powered off.
Message <
Action If the issue persists, see
Message IO module <
Details The CMC has powered off the IOM.
Action If the issue persists, see
Message A fabric mismatch detected on IO module <
Details The fabric type for IOM's on the same chassis fabric must match.
Action Check chassis fabric type in CMC GUI and compare to the type of both IOM's.
Message A link tuning failure detected on IO module <
Details Link tuning table not supported for this IO modular.
Action Update the CMC firmware. If the issue persists, see
Message A failure is detected on IO module <
Details The IOM module performance may be impacted.
Action If the issue persists, see
name > controller is offline.
Message The <
Details Information and status from the controller is unavailable.
Action Remove and reapply input power. If the issue persists, see
name > controller is stuck in boot mode.
Message The <
Details Information and status from the controller is unavailable.
manuals search engine
Getting
name >.
Getting Help.
name >.
Getting Help.
Getting Help.
Getting Help.
number > is offline.
Getting Help.
number >.
number >.
Getting
number >.
Getting Help.
Help.
Help.
Getting Help.