Dell PowerEdge M420 Owner's Manual page 114

Error Code Message Information
VLT0213
VLT0214
VLT0215
VLT0216
114
Downloaded from www.Manualslib.com
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
Message The disk drive bay <
LCD Message The disk drive bay <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
Message The disk drive bay <
LCD Message The disk drive bay <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
Message The disk drive bay <
LCD Message The disk drive bay <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
Message The < name > voltage is outside of range.
LCD Message The < name > voltage is outside of range.
manuals search engine
Getting Help.
name > voltage is less than the lower critical threshold.
name > voltage is outside of range.
Getting Help.
name > voltage is greater than the upper critical threshold.
name > voltage is outside of range.
Getting Help.
name > voltage is greater than the upper critical threshold.
name > voltage is outside of range.
Getting Help.