Dell PowerEdge M420 Owner's Manual page 118

Error Code Message Information
VLT0231
VLT0232
VLT0233
VLT0234
118
Downloaded from www.Manualslib.com
If multiple voltage exceptions occur consecutively the system may power down in fail-safe
mode.
Action
1. Review system logs for power supply exceptions.
2. Re-seat the mezzanine card.
3. If the issue persists, see
Message The mezzanine card <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-safe
mode.
Action
1. Review system logs for power supply exceptions.
2. Re-seat the mezzanine card.
3. If the issue persists, see
Message The mezzanine card <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-safe
mode.
Action
1. Review system logs for power supply exceptions.
2. Re-seat the mezzanine card.
3. If the issue persists, see
Message The mezzanine card <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-safe
mode.
Action
1. Review system logs for power supply exceptions.
2. Re-seat the mezzanine card.
3. If the issue persists, see
Message The mezzanine card <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-safe
mode.
Action
1. Review system logs for power supply exceptions.
2. Re-seat the mezzanine card.
manuals search engine
Getting Help.
number > < name > voltage is less than the lower critical threshold.
Getting Help.
number > < name > voltage is greater than the upper warning threshold.
Getting Help.
number > < name > voltage is greater than the upper critical threshold.
Getting Help.
number > < name > voltage is outside of range.