Dell PowerEdge M420 Owner's Manual page 71

Error Code Message Information
CBL0006
CPU0000
CPU0001
CPU0002
CPU0003
CPU0004
Downloaded from www.Manualslib.com
Action Check system fans. Replace the <
Message Multiple storage controllers are incorrectly connected to the same backplane <
Details Unsupported backplane configuration.
Action Check backplane configuration. Reconnect cable. If the issue persists, see
number > has an internal error (IERR).
Message CPU <
number > has an internal error (IERR).
LCD Message CPU <
Details System event log and OS logs may indicate that the exception is external to the
processor.
Action Review System Event Log and Operating System Logs. If the issue persists, see
Help.
number > has a thermal trip (over-temperature) event.
Message CPU <
number > has a thermal trip. Check CPU heat sink.
LCD Message CPU <
Details The processor temperature increased beyond the operational range.
Action Review logs for fan failures, replace failed fans. If no fan failures are detected, check
inlet temperature (if available) and reinstall processor heat-sink.
Message CPU < number > has failed the built-in self-test (BIST).
Action
1. Turn system off and remove input power for one minute. Reapply input power and turn
system on.
2. Make sure the processor is seated correctly.
3. If the issue persists, see
Message CPU < number > is stuck in POST.
Action
1. Turn system off and remove input power for one minute. Reapply input power and turn
system on.
2. Reduce system configuration to minimum memory and remove all PCI devices. If
system completes POST, update system BIOS. reinstall memory and PCI one
component at a time to meet the original configuration.
3. If the issue persists, see
Message CPU < number > failed to initialize.
Action
1. Turn system off and remove input power for one minute. Reapply input power and turn
system on.
2. Make sure the processor is seated correctly.
manuals search engine
name > battery.
Getting Help.
Getting Help.
Bay ID >.
Getting Help.
Getting
71