Dell PowerEdge M420 Owner's Manual page 110

Error Code Message Information
VLT0101
VLT0102
VLT0103
VLT0104
110
Downloaded from www.Manualslib.com
3. If the issue persists, see
Message Processor module <
LCD Message Processor module <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for bent pins.
3. If the issue persists, see
Message Processor module <
LCD Message Processor module <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for bent pins.
3. If the issue persists, see
Message Processor module <
LCD Message Processor module <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for bent pins.
3. If the issue persists, see
Message Processor module <
LCD Message Processor module <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
manuals search engine
Getting Help.
name > voltage is less than the lower critical threshold.
name > voltage is outside of range.
Getting Help.
name > voltage is greater than the upper warning threshold.
name > voltage is outside of range.
Getting Help.
name > voltage is greater than the upper critical threshold.
name > voltage is outside of range.
Getting Help.
name > voltage is outside of the allowable range.
name > voltage is outside of range.