Dell PowerEdge M420 Owner's Manual page 117

Error Code Message Information
VLT0226
VLT0227
VLT0228
VLT0230
Downloaded from www.Manualslib.com
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
Message The memory module <
LCD Message Memory module <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
Message The memory module <
LCD Message Memory module <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
Message The memory module <
LCD Message Memory module <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
Message The mezzanine card <
Details System hardware detected an over voltage or under voltage condition.
manuals search engine
Getting Help.
name > voltage is greater than the upper warning threshold.
number > < name > voltage is outside of range.
Getting Help.
name > voltage is greater than the upper critical threshold.
number > < name > voltage is outside of range.
Getting Help.
name > voltage is outside of range.
number > < name > voltage is outside of range.
Getting Help.
number > < name > voltage is less than the lower warning threshold.
117