Dell PowerEdge M420 Owner's Manual page 115

Error Code Message Information
VLT0218
VLT0219
VLT0220
Downloaded from www.Manualslib.com
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
name > voltage is less than the lower warning threshold.
Message The <
name > voltage is outside of range.
LCD Message The <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
name > voltage is less than the lower critical threshold.
Message The <
name > voltage is outside of range.
LCD Message The <
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
Message The < name > voltage is greater than the upper warning threshold.
LCD Message The < name > voltage is outside of range.
Details System hardware detected an over voltage or under voltage condition.
If multiple voltage exceptions occur consecutively the system may power down in fail-
safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and reinstall system
cables.
3. If the issue persists, see
manuals search engine
Getting Help.
Getting Help.
Getting Help.
Getting Help.
115