Dell PowerEdge M420 Owner's Manual page 77

Error Code Message Information
CPU0805
CPU0806
CPU0816
HWC1001
HWC1002
HWC1005
HWC1006
Downloaded from www.Manualslib.com
Message The power input for CPU <
attached to the system.
Details System performance may be degraded or the system may fail to operate.
Action
1. Turn system off and remove input power for one minute.
2. Reapply input power and turn system on.
3. Ensure the processor is seated correctly.
4. If the issue persists, see
number > voltage regulator module is incorrectly configured.
Message CPU <
number > voltage regulator module incorrectly configured. Check configuration.
LCD Message CPU <
Details System performance may be degraded or the system may fail to operate.
Action Review this manual for proper configuration and installation procedures.
number > voltage regulator module is absent.
Message CPU <
number > voltage regulator module absent. Check module.
LCD Message CPU <
Details System performance may be degraded or the system may fail to operate.
Action If removal was unintended, check presence and reinstall.
Message The < name > is absent.
LCD Message The < name > is absent. Check hardware.
Details The absent device may be necessary for proper operation. System functionality may be
degraded.
Action Reinstall or reconnect the hardware.
Message The < name > is disabled.
Action If device disabled unexpectedly, re-enable device.
Message The storage adapter is absent.
LCD Message The storage adapter is absent. Check hardware.
Details The storage adapter may be necessary for proper operation. System functionality may
be degraded.
Action Install storage adapter.
Message The storage adapter is disabled.
Action If adapter disabled unexpectedly, re-enable the storage adapter.
manuals search engine
number > voltage regulator module is outside of range, but it is
Getting Help.
77