Dell PowerEdge M420 Owner's Manual page 90

Error Code Message Information
PCI3006
PCI3008
PCI3010
PCI3012
PCI3014
PDR0001
PDR0002
PDR0016
90
Downloaded from www.Manualslib.com
Message Failed to get Link Tuning or FlexAddress data from iDRAC.
Details Either the BIOS or BMC/iDRAC firmware is out of date and does not support FlexAddress.
Action Update BIOS, and BMC/iDRAC firmware. If the issue persists, see
Message A non-fatal PCIe error detected on a component at bus <
func >.
<
Details System performance may be degraded.
Action Cycle input power, update component drivers, remove and reinstall the device at the next
service window.
Message A non-fatal IO error detected on a component at bus <
Details System performance may be degraded.
Action Cycle input power, update component drivers, remove and reinstall the device at the next
service window.
Message The QuickPath Interconnect (QPI) width degraded.
Details System performance may be degraded. The bus is not operating at maximum speed or
width.
Action Reset the system, if the problem persists reinstall processors.
Message A non-fatal PCIe error detected on a component at slot <
Details System performance may be degraded.
Action Cycle input power, update component drivers, remove and reinstall the device at the next
scheduled service time.
Message Fault detected on drive <
LCD Message Fault detected on drive <
Details The controller detected a failure on the disk and has taken the disk offline.
Action Remove and re-seat the failed disk. If the issue persists, see
Message A predictive failure detected on drive <
Details The controller received a SMART error from the drive. The drive is operational but needs
replacement.
Action The drive will need replacement at the next service window.
Message Drive < number > is removed.
LCD Message Drive < number > is removed. Check drive.
manuals search engine
bus >device< device >function
bus >device< device >function < func >.
number >.
number >.
number >. Check drive.
number >.
Getting Help.
Getting Help.