8.5.4 Cylinder head cover – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Assembly compound (Kluthe Hakuform 30-15)
O-ring
Removing cylinder head cover
1.
Clean very dirty cylinder head covers (1) prior
to removal.
2.
Remove screws (3, 4) with washers (2, 5).
3.
Take off cylinder head cover with O-ring (6)
from cylinder head (7).
Installing cylinder head cover
1.
Clean installation surface.
2.
Check O-ring (6) for damage, replace as necessary.
3.
Coat O-ring with assembly compound.
4.
Insert O-ring in groove on cylinder head cover (1).
5.
Fit cylinder head cover on cylinder head (7).
6.
Install cylinder head cover with screws (3, 4) and washers (2, 5).
Part No.
X00067260
(→ Spare Parts Catalog)
MS150123/01E 2017-05 | Valve Drive | 145
Qty.
1