MTU 16V4000M73 Operating Instructions Manual page 168

10. Loosen and remove screws (1).
11. Remove compressor housing (2).
Compressor wheel – Cleaning
Note: Never use a wire brush, scraper or similar ob-
ject for cleaning!
1. Clean compressor housing with a smooth
paint brush or brush.
2. Clean compressor wheel (2) and bearing
housing (1).
3. Thoroughly remove cleaner from all compo-
nents.
4. Replace sealing rings between bearing hous-
ing/compressor housing and plug-in sleeves
as necessary.
Final steps
1. Place compressor housing (2) in position.
168 | Exhaust Turbocharger | MS150123/01E 2017-05