Crankshaft Transport Locking Device - MTU 16V4000M73 Operating Instructions Manual

2.3 Crankshaft transport locking device

Special tools, Material, Spare parts
Designation / Use
Torque wrench, 10–60 Nm
Ratchet adapter
Torque wrench, 60–320 Nm
Ratchet adapter
Engine oil
Transport locking device
Note: The transport locking device on both sides protects the crankshaft bearings from shocks and possible vibra-
tion damage during engine transport.
For installation and removal of the transport locking device, follow the in-
structions below:
1. The transport locking device on both sides must remain installed as long as possible during engine installa-
tion in order to avoid damage.
2. Prior to every engine transport, the transport locking device must be reinstalled on both sides according to
the instructions.
3. If the engine is to be moved together with the generator, the transport locking device for the generator must
also be installed.
4. Always use the screws supplied with or installed in the transport locking device to secure it on the engine.
5. Starting or barring the engine is allowed only with the transport locking device removed. If the generator is
already mounted on the engine, ensure that the transport locking device of the generator is also removed.
Removing guard plates and en-
gine supports (if applicable) on
driving end (KS)
1. Remove screws (2) on both sides and take off
with washers (1), guard plates and engine
supports (3).
2. Store the removed parts of the transport
locking device carefully for possible reuse.
22 | Transport | MS150123/01E 2017-05
Part No. Qty.
F30452769 1
F30027340 1
F30452768 1
F30027341 1