Automatic Oil Filter - Assembly - MTU 16V4000M73 Operating Instructions Manual

8.16.8 Automatic oil filter – Assembly
Special tools, Material, Spare parts
Designation / Use
Engine oil
Assembly compound (Kluthe Hakuform 30-15)
Seal kit
WARNING
Heavy part, risk of falling or overturning due to lack of stability.
Risk of crushing body or limbs!
• Use appropriate lifting gear and appliances.
• Wear safety shoes.
NOTICE
Ingress of contamination from automatic oil filter in the engine oil system.
Severe engine damage possible!
• Remove the automatic oil filter before changing the oil filter candles.
• Keep everything scrupulously clean when performing maintenance and repair work.
• Cover all exposed openings when opening assemblies.
NOTICE
Contaminated components.
Risk of damage to component!
• Check components for special cleanliness and clean if necessary.
Assembling automatic oil filter
1. The assembly procedure is identical with that described for disassembly, but in reverse sequence of work
steps.
2. Additionally, the following instructions are to be observed:
a) Replace all sealing elements.
b) Coat O-rings with assembly compound.
c) Insert O-rings in grooves.
(→ Spare Parts Catalog)
MS150123/01E 2017-05 | Oil Filtration / Cooling | 217
Part No. Qty.
X00067260 1