MTU 16V4000M73 Operating Instructions Manual page 292

Torque screwdriver, 1–5 Nm
Torque wrench, 10–60 Nm
Torque wrench, 300–800 Nm
292 | Special Tools | MS150123/01E 2017-05
Part No.: F30452774
Qty.: 1
Used in: 8.7.2 Injector – Removal and installation (jacketed fuel
system) (→ Page 149)
Qty.: 1
Used in: 8.11.2 Air filter – Removal and installation (→ Page 172)
Part No.: F30452769
Qty.: 1
Used in: 2.3 Crankshaft transport locking device (→ Page 22)
Qty.: 1
Used in: 8.6.1 HP fuel pump – Filling with engine oil (→ Page 146)
Qty.: 1
Used in: 8.7.2 Injector – Removal and installation (jacketed fuel
system) (→ Page 149)
Qty.: 1
Used in: 8.8.5 Fuel prefilter with water separator – Filter element
replacement (→ Page 163)
Qty.: 1
Used in: 8.9.1 Compressor wheel – Cleaning (→ Page 166)
Qty.: 1
Used in: 8.13.13 NOx sensor – Replacement (→ Page 199)
Qty.: 1
Used in: 8.16.20 Centrifugal oil filter – Cleaning and filter-sleeve
replacement (→ Page 239)
Qty.: 1
Used in: 8.19.1 Battery-charging generator drive – Coupling condi-
tion check (→ Page 258)
Qty.: 1
Used in: 8.20.2 Engine mounting – Checking securing screws for
firm seating (→ Page 260)
Part No.: F30047798
Qty.: 1
Used in: 8.13.10 SCR catalytic converter – Mounting alignment
(→ Page 191)
Qty.: 1
Used in: 8.20.2 Engine mounting – Checking securing screws for
firm seating (→ Page 260)