Image Brightness (Target White); Jpeg Quality And Size Value - Motorola Symbol MT2070 User Manual

Image Brightness (Target White)

Parameter # F0h 86h
Type: Byte
Range: 1 - 240
This parameter sets the Target White value used in Snapshot, Video and Video Viewfinder mode when using auto
exposure. White and black are defined as 255 decimal and 0, respectively. Setting the value to the factory default
of 180 sets the white level of the image to ~180.
To set the Image Brightness parameter, scan Image Brightness below followed by three numeric bar codes
representing the value. Leading zeros are required. For example, to set an Image Brightness value of 99, scan 0,
9, 9. See Appendix D, Numeric Bar Codes
*
180

JPEG Quality and Size Value

JPEG Quality = Parameter # F0h, 31h
If you selected JPEG Quality Selector, scan the JPEG Quality Value bar code followed by 3 bar codes from
Appendix D, Numeric Bar Codes
image.
for numeric bar codes.
corresponding to a value from 5 to 100, where 100 represents the highest quality
Imaging Preferences
Image Brightness
(3 digits)
JPEG Quality Value
(Default: 065)
(5 - 100 Decimal)
6 - 9