Code 11; Set Lengths For Code 11 - Motorola DS9208 Product Reference Manual

10 - 46 DS9208 Product Reference Guide

Set Lengths for Code 11

Parameter # L1 = 28, L2 = 29
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within
a specific range. The default option is Length Within Range, 4 to 55.
NOTE When setting lengths, enter a leading zero for single digit numbers.
•
One Discrete Length - Decode only Code 11 symbols containing a selected length. Select the length
using the bar codes in
with 14 characters, scan Code 11 - One Discrete Length, and then scan 1, 4. To correct an error or to
change the selection, scan
•
Two Discrete Lengths - Decode only Code 11 symbols containing either of two lengths. Select
lengths using the bar codes in
symbols containing either 2 or 14 characters, select Code 11 - Two Discrete Lengths, and then scan
0, 2, 1, 4. To correct an error or to change the selection, scan
•
Length Within Range - Decode Code 11 symbols with a specific length range. Select lengths using
bar codes in
between 4 and 12 characters, first scan Code 11 - Length Within Range, and then scan 0, 4, 1, 2. To
correct an error or change the selection, scan
•
Any Length - Decode Code 11 symbols containing any number of characters within the digital scanner's
capability.
Code 11 - One Discrete Length
*
Code 11 - Length Within Range
(Default: 4 to 55)
Appendix G, Numeric Bar
Cancel on page G-2.
Appendix G, Numeric Bar
Appendix G, Numeric Bar Codes.
Codes. For example, to decode only Code 11 symbols
Codes. For example, to decode only Code 11
Cancel on page
For example, to decode Code 11 symbols containing
Cancel on page G-2.
Code 11 - Two Discrete Lengths
Code 11 - Any Length
G-2.