Table of Contents
Advertisement
479646
7.2.18
Removal
Controller
1.
Remove the rear cover (refer to Section 7.2.2).
2.
Remove the 3 mounting screws from the rear of
the machine to release the housing.
3.
Invert the housing to expose the cover clips and
release the cover.
NB.
Do not try to release the cover using the
ribbed housing clips as they may be damaged
and be unable to hold the cover in place.
4.
Release the connectors and remove the
module.
Reassemble in the reverse order.
of
the
Motor
26
Advertisement
Table of Contents
