479646
13.1.9
Err 7:07
Error message: Wash Motor Windings over Temperature Error
Trouble shooting:
The motor control module has detected the motor windings are over temp.
Measure / check the motor harness, connectors and
motor for discontinuity and shorts by taking the
resistance measurement between phases at the motor
control module. Nominal resistance should be 28
ohms.
Hand Rotate the drum checking that it turns freely.
Replace the motor control module.
Y
Y
N
N
42
Check harness
connections. Replace
the stator.
Check bearings and
seals as they may be
seized.