13.2.4
Abnormal Noise and Vibration
Leaking Water
Have the transit bolts been
removed?
Y
Is there foreign material in the
washer?
N
Is the washer stable and level
front to back and side to side?
Y
Are the mounting bolts for the
counter weights and the stator
tight?
Y
Disconnect the motor harness at the
motor controller and rotate the drum
by hand. Is there an abnormal
noise?
N
Y
N
N
Y
Y
55
Remove the bolts and
check the installation.
Locate and remove.
Adjust the adjustable feet
and tighten the locking nut.
Tighten them.
Dismantle the tub, remove
the drum and check the
bearings. If faulty, replace
the tub rear.
Replace
damaged half of
outer tub.
479646