Danfoss VLT HVAC Operating Instructions Manual page 60

6. How to programme the frequency converter
Illustration 6.2: Step 1: Turn on the frequency
converter (open LED lights)
6
Illustration 6.3: Step 2: Press the [Quick Menus]
button (Quick Menus choices appear).
Illustration 6.4: Step 3: Use the up/down naviga-
tion keys to scroll down to Function Setups. Press
[OK].
Illustration 6.5: Step 4: Function Setups choices
appear. Choose 03-1
The Function Setup parameters are grouped in the following way:
Q3-10 Adv. Motor Settings Q3-11 Analog Output
1-90 Motor Thermal Protection 6-50 Terminal 42 Output
1-93 Thermistor Source
1-29 Automatic Motor Adap-
tion
14-01 Switching Frequency
60
General Settings
. Press [OK].
Q3-1 General Settings
6-51 Terminal 42 Output
max. scale
6-52 Terminal 42 Output
min. scale
MG.11.A4.02 - 09.10.06. VLT
®
VLT HVAC Drive Operating Instructions
Illustration 6.6: Step 5: Use the up/down naviga-
tion keys to scroll down to i.e. 03-11
puts . Press [OK].
Illustration 6.7: Step 6: Choose parameter 6-50
Terminal 42 Output
. Press [OK].
Illustration 6.8: Step 7: Use the up/down naviga-
tion keys to select between the different choices.
Press [OK].
Q3-12 Clock Settings Q3-13 Display Settings
0-70 Set date and time 0-20 Display Line 1.1 Small
0-71 Date format 0-21 Display Line 1.2 Small
0-72 Time format 0-22 Display Line 1.3 Small
0-74 DST/Summertime 0-23 Display Line 2 large
0-76 DST/Summertime start 0-24 Display Line 3 large
0-77 DST/Summertime end 0-37 Display Text 1
0-38 Display Text 2
0-39 Display Text 3
® is a registered Danfoss trademark
Analog Out-