Danfoss VLT HVAC Operating Instructions Manual page 34

4. Electrical installation
Remove front-cover to access control termi-
nals. When replacing the front-cover, please
ensure proper fastening by applying a torque
of 2 Nm.
4
4.1.17. Control Terminals
Drawing reference numbers:
1.
2.
3.
4.
34
10 pole plug digital I/O.
3 pole plug RS-485 Bus.
6 pole analog I/O.
USB connection.
MG.11.A4.02 - 09.10.06. VLT
®
VLT HVAC Drive Operating Instructions
Illustration 4.17: A5, B1,B2, C1 and C2 enclosures
Illustration 4.18: Control terminals (all enclosures)
® is a registered Danfoss trademark