Cash Drawer Installation
NOTE:
1. Turn off the system power properly through the operating system, then turn off any external
devices.
2. Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
3. Switch 12V/24V cash drawer switch according to your cash drawer's specification, and then plug the
cash drawer cable into the cash drawer port.
4. Reconnect the power cord and any external devices, then turn on the system.
Before connecting cash drawer to the system, please make sure the driver
voltage and cable pin assignment of the cash drawer matches the definition of
the system's cash drawer port.
Before installing the cash drawer to the system, please make sure the system
driver has been installed.
Regardless of the power-on state, voltage is always present on the main board as
long as the system is plugged into an active AC outlet. You must disconnect the
power cord to avoid damage to the internal components of the system.
12V/24V Cash
Drawer Switch
21