Opening System Box - Advantech WP-5530-PD10 User Manual

Opening System Box

CAUTION:
1. Turn off the system power properly through the operating system, then turn off any external
devices.
2. Disconnect the power cord from the power outlet and disconnect any external devices.
WARNING!
3. For easier access place the main LCD display upside down, then pry VFD cover open with a flat
screw driver.
4. Detach the right side cover, left side cover and rear cover.
To prevent loss of work and damage to the system or drive:
If you are inserting or removing a drive, shut down the operating system
properly, turn off the system, and unplug the power cord. Do not remove a drive
while the system is on or in standby mode.
Before handling a drive, ensure that you are discharged of static electricity. While
handling a drive, avoid touching the connector.
To avoid scratching the panel while dismantling the system, first place a piece of
cloth or cushion on your work surface.
10