Rear Mount Vfd Usb-To-Serial Driver Installation (Optional) - Advantech WP-5530-PD10 User Manual

Rear Mount VFD USB-to-Serial Driver Installation (optional)

The WP-5530 VFD port is a USB interface. The 9mm VFD uses a Serial interface, so in order to enable it,
you must install the included USB-to-Serial interface driver.
1. First, plug in the VFD Module.
2. Enter the USB To COM Driver folder and then run utility program
PL2303_Prolific_driverInstaller_v130.
3. Click Next on the Welcome screen. 4. Wait as the driver is installed.
5. Click Finish.
51