M Scotch Tape Mount Installation - Gazer F525 User Manual

3M scotch tape mount installation

Warning!
ENG Make sure the place is dry and clean. Do not install the mount on
3M scotch tape at temperature below +5°C. Because of such low
temperature the difference between the temperature inside the
car and outdoors, the 3M scotch will lose its adhesive properties
and will not be able to fix the mount properly.
1
Unscrew the nut of the AM101
vacuum mount and detach the
lower and upper parts.
3
Use the screw and the nut that
come in the package to securely
attach both parts.
5
16
Wipe the surface of the windshield before installing.
Connect the bottom of the vacuum
mount with 3M scotch tape.
Attach the frame of the recorder
to the 3M scotch tape mount.
Prior to installing, determine the exact
MVR position on the windshield. Mark
the installation place. Remember that
once the mount is installed on the car
windshield, you cannot change the
horizontal position of the device (side to
side), only vertical position (up and
down) can be changed afterwards.
2
4