Usage - Gazer F525 User Manual

• When the device is on, the status indicator (3) stays blue and
starts flashing when the recording mode is activated. When the
ENG
MVR is charging, the status indicator flashes red (3). In case
the device is fully charged or no power is supplied, the indicator
(3) stays off. To determine the status of the device you can
either use the status indicator or check the display icons.
The MVR starts recording automatically when the power is on,
•
there is no need to press REC/SNAP button (8) manually.
The MVR automatically shuts down, saves the video and switches
•
off when no power is supplied. Manual shutdown (before you
turn off the ignition) is not required. If necessary, you can
manually turn off the MVR by long pressing the ON/OFF button
(6). Use the same button to turn it back on.
• You can change the camera exposure in the recording mode by
pressing the UP/DOWN button.
Note:
Do not turn off the recorder manually if it is in the
recording mode (this may damage the last recording). First stop
the recording and then turn off the device. The MVR can operate
independently for a certain period of time. The offline operation
time depends on the status and charge of the removable battery.
Recommendation:
video length (2 minutes). In this case, the pauses between
videos will be minimal. The longer the videos are, the longer are
the pauses between them.
8

Usage

:
Use the recording mode with a minimum