Table of Contents
Advertisement
Battery Installation
1. Unscrew the cover at the end of the unit.
2. Place yourfinger on the 'lip', which is on the bottom half of the rear of
the unit, and open the battery slot door.
3. Insert 2 x AAalkaline batteries into the battery slot according to the
polarity direction as shown.
4. Close the battery slot door and screw on the end of unit cove
Important: When the battery is low, the low battery icon will appear on
the LCD display.
Always upload video footage to your PC prior to
replacing batteries to avoid memory loss
Note:
a) Do not mix old and new batteries together. Replace both batteries at
the same time.
b) Remove the batteries if the camera is not going to
be used for long periods of time. This will save battery life.
c) Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries
(nickel-cadmium). Only batteries of the same or equivalent type as
recommended are to be used together.
Non-rechargeable batteries are not to be recharged
Autogood products Internet store "130"
Advertisement
Table of Contents
