Installation And Connection - Gazer F750w User Manual

• Degrease the surface of the windshield before installing the cameras.
• Make sure that the installation place is dry and clean.
EN
• Do not install the camera mount with 3M scotch tape at temperatures
below +5 °C.
• Before installing, try the exact position of the camera on the
windshield, circle the mount location with a marker, remove the
protective film from 3M scotch tape and fix the camera mount in the
pre-selected location.
• Insert a memory card into the central unit. Pay attention to the
correct installation; the card is installed so that its contacts will face
towards the screen. The memory card should be installed effortlessly
until the click of the lock is heard.
• Connect the cables from the cameras, the GPS module cable and the
power cable to the central unit of the dashcam. When the car ACC
signal is generated, the unit automatically switches on and beeps.
• Plug the power supply unit into the car socket.
8

Installation and connection