ACCESSORIES
15-49
FRONT SPEAKER
CONNECTOR
I.P. HARNESS
INSTRUMENT
PANEL BRACE
ANTENNA LEAD-IN
TRIMMER
SCREW
R. H. CONTROL
SHAFT
ASM.
Fig. 15-56 X Series Radio Installation
RADIO DIAL AND STEREO LIGHT
REMOVE AND REPLACE
All except B Series
1. Remove radio as outlined under "Radio (AM, AM-
FM and AM-FM STEREO)
-
Remove and Replace".
2. Remove tape and/or cover from top of radio for
access to dial light.
3. Remove light from socket.
4. To replace, reverse removal procedure.
B Series
1. Tune radio dial pointer to high end of band.
2. Press the dial plate down (Fig. 15-57) and tilt out at
top to remove.
3.
For dial light removal, remove dial light bracket by
pulling it forward and unclip from radio.
4. For stereo light removal, turn stereo light counter-
clockwise from socket (located in lower right corner
of radio).
1
D J A L LAMP
I
STEREO
Fig. 15-57 Radio Dial and Stereo Light Removal