CHASSIS ELECTRICAL
12-63
PARKING'
LAMP ASM.
VIEW A
HEADLAMP CAPSULE ASM.
Fig. 12-69 F Series Front Lamps Installation
REAR
1. B Series (except station wagons), G, F and X Series
-
twist bulb and socket from assembly inside of trunk.
Remove two (2) retaining nuts for housing removal.
2. A Series (except station wagons)
-
remove tail lamp
lens for bulb removal.
3. Station Wagon models
-
remove lens assembly at rea
quarter and twist bulb and socket from behind.
INSTRUMENT PANEL (SPEEDO)
CLUSTER
Removal of these units can be accomplished by using the
following installation diagrams, Figs. 12-82 through 12-
86, and by referring to the procedures below.
REMOVE AND REPLACE
B SERIES
1. Disconnect battery and remove lower and upper IP
trimplates.
2. Remove automatic transmission shift indicator and
speedometer cluster bezel.
3. Remove cluster retaining screws, pull rearward, dis-
connect speedo cable and printed circuit connector.