Pontiac FIREBIRD 1972 Service Manual page 1442

ACCESSORIES 15-27
4. Remove upper A/C duct if equipped.
5. Disconnect bulbs and power feed from clock.
6. Loosen clock retaining screws (3) and rotate clock in
a clockwise direction (as viewed from passenger side).
Remove clock.
7. To replace, reverse removal procedure.
B and
F
Series (Fig. 15-25)
Remove instrument panel speedo cluster as outlined in
Section 12 and remove clock from cluster.
X Series (Fig. 15-26)
4. T o replace, reverse removal procedure.
DASH-MOUNTED TACHOMETER
R E M O V E A N D REPLACE
For removal of dash-mounted tachometer on A and F
Series use procedure for clock removal.
DECK LID RELEASE SWITCH
R E M O V E A N D REPLACE
All except G Series with Console
1. Remove ash tray and bracket on models with air
conditioning to gain access to switch.
1. Disconnect battery and remove radio (includes
remove knobs, bezels, nuts and side brace screw, dis-
2. Disconnect wires from switch.
connect antenna lead-in and connectors).
3. Depress retaining clips and remove switch.
2. Remove clock stem knob, disconnect clock lead,
twist and remove four (4) cluster bulbs near clock.
4. To replace, reverse removal procedure.
3. Remove two (2) screws from printed circuit and
See Figs. 15-27 (B Series), 15-28 (A Series) and 15-29 (G
clock, "fold" back printed circuit and remove clock.
Series).
&
SPEEDOMETER
,
. - -
CLUSTER
'
VlEW A
7
NOTE Plug connector into
-
fuse panel receptacle marked
"BAT".
7
VlEW B
-
Fig.
15-26
Clock Installation