Pontiac FIREBIRD 1972 Service Manual page 1080

76-42 1972 PONTIAC SERVICE M A N U A L
ALLS
Fig 7 6 - 5 2 Location of Check Balls
8. Remove valve body spacer plate and valve body
spacer plate-to-case gasket (Fig. 7 6 - 5 1).
9. Remove four (4) check balls from cored passages in
case face (Fig. 76-52),
10. Remove oil pump pressure screen from oil pump
pressure passage in case and clean (Fig 76-53).
11. Remove governor feed screens from passages in case
and clean (76-54).
12. Remove manual shaft-to-case retainer with a screw-
driver (76-55).
L
i
OIL P U M P P R E S S U R E S C R E E N
Fig. 7G-54 Removing Governor Screens
Loosen jam nut that holds range selector inner lever
to manual shaft.
Remove jam nut and remove manual shaft from
range selector inner lever and case.
Disconnect parking pawl actuating rod from range
selector inner lever and remove both from case (Fig.
76-42).
If necessary to replace, remove manual shaft-to-case
lip oil seal, using a screwdriver (Fig. 76-56).
Remove two (2) bolts and parking lock bracket.
Fig. 7 6 - 5 3 Removing Pump Pressure Screen
Fig. 7 6 - 5 5 Removing Manual Shaft Retainer