Pontiac FIREBIRD 1972 Service Manual page 1412

14-12 1972 PONTIAC SERVICE MANUAL
2. Support bumper and disconnect bumper hanger to
body bolts.
3. Remove bumper reflectors and hanger brackets.
REMOVE
-
A SERIES (EXCEPT STATION
WAGONS) (Fig. 14-1 9)
1. Remove valance panel.
2. Remove license lamp assembly.
3. Disconnect tail lamps.
4. Support bumper-remove bumper hanger to body
bolts.
5. Remove brackets from bumper.
REMOVE
-
A SERIES STATION WAGON (FIG.
14-20)
1. Disconnect all lights contained in or attached to the
bumper.
2. Remove step and tread assembly
3. Support bumper-remove hanger bracket to frame at-
taching bolts.
4. Remove brackets from bumper.
5. T o remove the latch cover assembly from the station
wagon tailgate, proceed as follows:
a. Open tailgate.
b. Remove inner cover to eKpose outer latch cover
bolts.
c. Remove outer latch cover.
NOTE: The bumper is fully adjustable to per-
mit aligning the step opening with the striker
on body.
REMOVE-F SERIES (Fig. 14-21)
1. Remove body to bumper hanger bracket bolts from
inside trunk.
2.
'
Remove bumper assembly.
3. Remove bumper hanger brackets.
Fig. 14-19 A Series Rear Bumper Assembly