Working With Configuration Files - Nortel Remote Office 9150 Installation And Administration Manual

March 2000

Working with configuration files

Introduction
This section explains how to
create a configuration file (see page 184)
open a configuration file in Configuration Manager (see page 185)
perform a configuration upload (see page 186)
perform a configuration download (see page 186)
When to use the Configuration Manager file operations
You can use
OK, File
File Save As
one of the following:
Send
Send All
Retrieve
Upload
Configuration
Download
Configuration
Installation and Administration Guide
When you are
Open, and working in offline mode
or
connected and logged on to a unit.
Note: When working in offline mode, you must save
the configuration to a file. However, when you are
connected and logged on to a unit, the file save
operation is optional when you use Send or Send All to
update the unit's flash memory.
connected and logged on to a unit.
Configuration Manager overview
183