Using Configuration Manager's Ping - Nortel Remote Office 9150 Installation And Administration Manual

Troubleshooting

Using Configuration Manager's Ping

Introduction
This section explains how to use the Ping option provided in Configuration
Manager to verify network connectivity. Use this test as a troubleshooting tool to
determine if you can reach the MIG RLC, another remote unit, or any other
device on the network.
Getting there
9150
To perform a Configuration Manager ping
1 From the menu, choose Tests
Result: The PING Test dialog box appears.
2 Enter the IP Address of the unit you want to ping.
3 In the Number of Cycles box, enter the number of times you want to ping
the unit.
The number must be in the range of 1–100.
366
Configuration Manager
Ping.
Standard 1.0
Remote Office 9150