Overview - Nortel Remote Office 9150 Installation And Administration Manual

Configuration Manager overview

Overview

Introduction
Configuration Manager is the software application used to configure and
administer the Remote Office 9150 unit and the MIG RLC port to which it is
connected.
Viewing the main screen
The main screen is divided into three parts—a menu and two panes.
The menu across the top of the screen lists various administrative tasks you
can perform. These tasks are common to all Remote Office units.
The pane on the left lists the property sheets you can work with. In this
guide, the left pane is called the system tree.
The pane on the right displays the screen associated with an item you
selected from the system tree. In this guide, the right pane is called the
property sheet.
Configuring a unit
You can configure a unit (that is, a Remote Office 9150 unit or MIG RLC) in one
of two ways:
Connect to, and then log on to the unit by serial port or Telnet (which
requires Ethernet network connectivity).
Once the connection is established, you can display the current
configuration by clicking Retrieve. When the configuration details appear,
you can make changes and update the unit's flash memory immediately by
clicking Send, and then performing a Save to Flash.
Perform an offline configuration (which consists of saving the
configuration changes in a file on your PC), and then update a unit's flash
memory at a later time.
162
Standard 1.0
Remote Office 9150