Selecting The Device Type For Offline Configuration - Nortel Remote Office 9150 Installation And Administration Manual

March 2000
Selecting the device type for offline
configuration
Introduction
If you are not logged on to a particular system (that is, a MIG RLC or a Remote
Office 9150 system), you must select the type of device with which you want to
work.
When you select the device type, it causes the Configuration Manager
application to automatically reorganize the system tree with the screens
associated with that device type.
To select the device type
1
Start Configuration Manager as described in "Starting Configuration
Manager" on page 164.
2 Do the following:
To view the
system tree for
the MIG RLC
the Remote Office 9150 unit
3 Click the plus sign beside Configuration Manager in the left pane.
Result: The system tree expands, showing you the types of configuration
you can work with, as shown in the example on page 188.
Installation and Administration Guide
Configuration Manager overview
Do the following
Choose View Device Type
Choose View Device Type
RLC.
9150.
187