84 Chapter 4 Operating the Passport 8000 Series switch
Figure 47 Removing a removable flash memory card: 8010, 8006, 8003 Chassis
2
Pull the flash memory card out of the card receptacle.
Protecting memory card files
Nortel Networks ships each memory card with its read-write protect switch in the
unprotected position. After you successfully load the configuration file and save
your configuration, you may want to write-protect the memory card for backup
purposes.
To change memory card protection:
1
Remove the memory card from the 8000 Series chassis.
a
316314-D Rev 00
Note: You typically do not operate a Passport 8000 Series switch with a
write-protected memory card. You should make a copy of your
configuration on another memory card, write-protect that card, and store
it in a safe place. If you do not have a second memory card you can copy
your configuration to a TFTP or FTP server.
Press the eject button above the memory card receptacle (see
page
83).
Eject button
PPOC0022A
Figure 46 on