Table of Contents
Advertisement
System Requirements
•
•
•
•
•
FRSM12
The following is the new FRSM12 SCT file introduced for this release:
•
The following are checksums for the new FRSM12 SCT file:
•
•
PXM1E
The following are the new PXM1E SCT files introduced for this release:
•
•
•
•
•
The following are checksums for the new PXM1E SCT files:
•
•
•
•
•
System Requirements
This section describes software compatible with this release, and lists the hardware supported in this
release.
Software/Firmware Compatibility Matrix
Table 3
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10
8
AXSME_SCT.PORT.53.V1—Check sum = 0xf6d53485 = 4141167749
AXSME_SCT.CARD.52.V1—Check sum = 0xde496f2 = 233084658
AXSME_SCT.PORT.54.V1—Check sum = 0x2a96b5b9 = 714519993
AXSME_SCT.PORT.55.V1—Check sum = 0x5403c5ac = 1409533356
AXSME_SCT.PORT.6.V1—Check sum = 0xb69ce935 = 3063736629
SCT 7—Enable WFQ for all ATM service types as the default.
FRSM12_SCT.CARD.7.V1—Check sum = 0x587dd247 = 1484640839
FRSM12_SCT.PORT.7.V1—Check sum = 0x58d9a42a = 1490658346
SCT 52—Policing enabled.
SCT 53—Policing disabled.
SCT 54—Policing enabled.
SCT 55—Policing disabled.
SCT6—Policing disabled, used for trunks.
PXM1E_SCT.PORT.52.V1—Check sum = 0x199550ec = 429215980
PXM1E_SCT.PORT.53.V1—Check sum = 0xf6d53485 = 4141167749
PXM1E_SCT.PORT.54.V1—Check sum = 0x2a96b5b9 = 714519993
PXM1E_SCT.PORT.55.V1—Check sum = 0x5403c5ac = 1409533356
PXM1E_SCT.PORT.6.V1—Check sum = 0xb69ce935 = 3063736629
lists Cisco WAN or Cisco IOS products that are interoperable with Release 3.0.10.
OL-2914-01 Rev D0, July 3, 2003
Advertisement
Table of Contents
