Alarm Filtering; Enhancements; Service Class Template File Information - Cisco MGX 8850 PXM45 Release Notes

Alarm Filtering

The Alarm Filtering feature works in conjunction with Cisco WAN Manager (CWM) 11.0.10 to display
a filtered integrated shelf alarm. The filtered integrated shelf alarm ignores all lines, ports, connections
and feeder alarms reported by a given node. When the CWM GUI displays a group of nodes in group
mode, the group's integrated alarm is the aggregation of all filtered alarms reported by the nodes in the
group, and all trunk/line alarms reported by these nodes.

Enhancements

The product enhancement requests (PERs) in
Table 2 List of Product Enhancement Requests in MGX Release 3.0.10
Enhancement
Number Purpose
2291 The persistent topology feature provides CWM with a persistent view of the network, regardless of the
current operational status of the nodes in the network. Topology information (IP address, node ID, feeder
port ID, etc.) is stored in the persistent topology database for each node in the network. If a node is
disconnected from the network due to some error scenario (the link went down, the node rebooted, etc.),
CWM would still be able to retrieve information about this node from the persistent topology database.
Starting with this release, the persistent topology database contains information on the routing and feeder
nodes in the network.
5055 CLI commands provided to display VC/CoS thresholds in the AXSM-E QE.
5068 dspport on AXSM-E card and dsppnport on PXM card should display the same number of SVCs.
5267 Better clock resolution provided for tstdelay on AXSM-E cards.

Service Class Template File Information

This section contains service class template (SCT) file information for Release 3.0.10.
AXSM-E
The following are the new AXSM-E SCT files introduced for this release:
•
•
•
•
•
The following are checksums for the new AXSM-E SCT file:
•
OL-2914-01 Rev D0, July 3, 2003
SCT 52—Policing enabled, for ATM T1/E1 application, maximum VC/CoSB cell threshold setting
is the same between SCT 52 and 53.
SCT 53—Policing disabled, for ATM T1/E1 application, maximum VC/CoSB cell threshold setting
is the same between SCT 52 and 53.
SCT 54—Policing enabled, IMA group with 1 to 4 links, maximum VC/CoSB cell threshold setting
is the same between SCT 54 and 55.
SCT 55—Policing disabled, IMA group with 1 to 4 links, maximum VC/CoSB cell threshold setting
is the same between SCT 54 and 55.
SCT6—Policing disabled, used for trunks.
AXSME_SCT.PORT.52.V1—Check sum = 0x199550ec = 429215980
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10
New Features and Enhancements in Release 3.0.10
Table 2 were introduced in Release 3.0.10.
7