Cisco MGX 8850 PXM45 Release Notes page 72

Caveats
Table 27
DDTs Issue
CSCdy82098
CSCdy82600
Table 28
Table 28
DDTs Issue
CSCdt61581
CSCdv53825
CSCdv85607
CSCdw41209
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10
72
Severity 1 Open Caveats for MGX 8850 3.0.10 Software (continued)
Description
Hardware:pxm45
Symptom: Node failed to establish connections, and ports go to building state etc.
Conditions: Heavily populated node with PXM45A cards.
Workaround: Do resetsys.
Hardware:pxm1e
Symptom:Inconsistent redundancy on CESM cards on MGX8850 with PXM1E.
Conditions:Ungraceful upgrade was in progress for three cards in this slot. After the
upgrade, 1:n redundancy was configured (slots 25 & 26 as active, slot27 as standby).
Resetcd on slot 25 changed this state to standby and slot 27 to active for "dspcds".
However, after "cc" from pxm slot 25 is active and 27 standby.
Workaround:Unknown.
lists the Severity 2 open caveats for the MGX 8850 Release 3.0.10 software.
Severity 2 Open Caveats for MGX 8850 3.0.10 Software
Description
Hardware: pxm45
Symptom: Faulty card did not go into continuous reset during Utopia bus parity error
failure
Conditions: Utopia bus parity error fault insertion was being undertaken
Workaround: Unknown.
Hardware: pxm45
Symptom: sframetick lock config is lost.
Conditions: When a switchcc is executed on the shelf.
Workaround: None.
Hardware: axsme
Symptom: Core dump occurred for standby AXSME OC3 card though no activities.
Conditions: AXSMEOC3 with standby card.
Workaround: Unknown.
Hardware: ausm-8t1e1
Symptom:
Conditions:
Workaround:
OL-2914-01 Rev D0, July 3, 2003