Obtaining Documentation - Cisco MGX 8850 PXM45 Release Notes

Table 45 MGX 8250 Edge Concentrator Release 1.2.11 Documentation (continued)
Title
Cisco MGX Route Processor Module Installation and
Configuration Guide, Release 1.1
Release Notes for Cisco MGX 8230, MGX 8250, and
MGX 8850 (Release 1), Software Version 1.2.11 (PXM1)
Release Notes for Cisco MGX Route Processor Module
(RPM/B and RPM-PR) for Release 1.2.11 and Release
3.0.10
MGX 8230 Edge Concentrator Release 1.2.11
The documentation for the installation and operation of the MGX 8230 Edge Concentrator is listed in
Table
Table 46 MGX 8230 Edge Concentrator Documentation
Title
Cisco MGX 8230 Edge Concentrator Installation and
Configuration, Release 1.1.3
Cisco MGX 8230 Multiservice Gateway Command
Reference, Release 1.1.3
Cisco MGX 8230 Multiservice Gateway Error Messages,
Release 1.1.3
Cisco MGX 8230 Edge Concentrator Overview,
Release 1.1.3
Cisco VISM Installation and Configuration Guide,
Release 3
Cisco MGX Route Processor Module Installation and
Configuration Guide, Release 1.1
Release Notes for Cisco MGX 8230, MGX 8250, and
MGX 8850 (Release 1), Software Version 1.2.11 (PXM1)
Release Notes for Cisco MGX Route Processor Module
(RPM/B and RPM-PR) for Release 1.2.11 and Release
3.0.10

Obtaining Documentation

These sections explain how to obtain documentation from Cisco Systems.
OL-2914-01 Rev D0, July 3, 2003
46.
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10
Description
Describes how to install and configure the MGX Route Processor
Module (RPM/B and RPM-PR) in the MGX 8850, MGX 8250,
and MGX 8230 Release 1 switch. Also provides site preparation,
troubleshooting, maintenance, cable and connector specifications,
and basic Cisco IOS configuration information.
Provides new feature, upgrade, and compatibility information, as
well as known and resolved caveats.
Provides new feature, upgrade, and compatibility information, as
well as known and resolved caveats.
Description
Provides installation instructions for the MGX 8230 Edge
Concentrator.
Provides detailed information on the general command line
interface commands.
Provides error message descriptions and recovery procedures.
Provides a technical description of the system components and
functionality of the MGX 8250 Edge Concentrator from a
technical perspective.
Describes how to install and configure VISM in several
MGX 8000 Series switches. This guide is available online only.
Describes how to install and configure the MGX Route Processor
Module (RPM/B and RPM-PR) in the MGX 8850, MGX 8250,
and MGX 8230 Release 1 switch. Also provides site preparation,
troubleshooting, maintenance, cable and connector specifications,
and basic Cisco IOS configuration information.
Provides new feature, upgrade, and compatibility information, as
well as known and resolved caveats.
Provides new feature, upgrade, and compatibility information, as
well as known and resolved caveats.
Obtaining Documentation
115