Table of Contents
Advertisement
RPM-PR and RPM-XF Limitations
Starting with Release 3.0.00, Route Processor Module (RPM) cards have their own release notes. For
details on the MGX-RPM-PR-256/512 cards, refer to the Release Notes for Cisco MGX Route Processor
Module (RPM/B and RPM-PR) for MGX Release 1.2.11 and MGX Release 3.0.10 or the Release Notes
for Cisco MGX Route Processor Module (MGX-RPM-XF-512) for MGX 8850 (PXM45) Release 3.0.10.
These release notes are available online at the following location:
The release notes are identified by switch name (for example, MGX 8850 (PXM45), Release 3, Route
Processor Module, Release Notes.
Restrictions for Release 3.0.10
AXSM-32-T1E1-E
•
•
•
•
PXM1E-16-T1E1
•
•
•
•
Restrictions for Release 3.0.00
AXSM Model B Restrictions
The enableaxsmbaps command is a PXM CLI command required to turn on additional APS features on
AXSM/B cards in Releases 3.0.x and up. By issuing this command, the card operating mode becomes
AXSM Op B. This command is required only while upgrading configured cards with Release 3.0.x
images. If the AXSM/B cards do not have any configuration and are upgraded with Release 3.0.x, then
the card operating mode would be made as AXSM Op B and it is not required to issued the
enableaxsmbaps command.
The command has the following syntax:
OL-2914-01 Rev D0, July 3, 2003
http://www.cisco.com/univercd/cc/td/doc/product/wanbu/index.htm
Maximum number of user connections is 32096.
Maximum number of links in an IMA group is 16.
PNNI requires that SCR be equal to 453 cells per second and PCR be equal to 969 cells per second
for the control connection.
SSCOP requires that SCR be equal to 126 cells per second and PCR be equal to 2000 cells/second.
Maximum number of connections is 13500.
Maximum number of links in an IMA group is 16.
PNNI requires that SCR be equal to 453 cells per second and PCR be equal to 969 cells per second
for the control connection.
SSCOP requires that SCR be equal to 126 cells per second and PCR be equal to 2000 cells per
second.
enableaxsmbaps <primary | secondary slot>
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10
Limitations, Restrictions, and Notes
41
Advertisement
Table of Contents
