Cisco MGX 8850 PXM45 Release Notes page 95

Table 29
DDTs Issue
CSCdy64846
CSCdy64892
CSCdy65252
CSCdy67817
CSCdy72671
CSCdy72707
OL-2914-01 Rev D0, July 3, 2003
Severity 3 Open Caveats for MGX 8850 3.0.10 Software (continued)
Description
Hardware: pxm1e
Symptom: Non-native PXM comes up as active with no databases
Conditions: When native active PXM (with configuration/databases) has a hardware
failure in a node with single PXM and a non-native PXM is inserted
Workaround: None.
Hardware:pxm45
Symtoms: The error message "CPRO-SNMP_ERROR cutW1Task cpro_log_error
SNMP error; id = 117; err Connection does not exist in cPro db" appears.
Conditions:MGX45, Version 2.1(80.0)
Workaround:None.
Hardware: pxm1e
Symptom: Once clock is unlockable it needs to be reconfigured.
Conditions: On PXM1E when line clock is configured and for some reason if it goes
unlockable it need to be deleted and reconfigured even if the problems with line gets
clear. For example, if a line configured as clock is an OC3 line and this line is config.
for APS. In this case when primary card is active with both APS in okay state and if
there is LOS on the working line the clock will go in unlockable state. Upon removing
LOS from this line doesn't clear unlockable situation from the clock
Workaround: Unknown.
Hardware: axsm1b_oc3
Symptom: PNNI ports went into down in progress state and SPVCs failed during fault
insertion testing.
Conditions: Skystone Port 1 secondary in reset (SWC6) and (SWC5) faults were
inserted on an active AXSM card.
Workaround: Unknown.
Hardware: axsme
Symptom: Problem 1:Currently, the HMM on the AXSM and AXSM E cards (and
PXM45?) attempt to detect if the configured Humvee port state is equivalent to the
current Humvee transceiver state. If there is a discrepancy, the HMM will report to
the SHM to shutdown the mismatching link(s). The current algorithm does not work
correctly for all cases, see rules below to address all permutations
Conditions:
Workaround:
Hardware: pxm45
Symptom: Unknown.
Conditions: Unknown.
Workaround: Unknown.
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10
Caveats
95