Cisco Ios Release 12.1(5)Ye3; Introduction; System Requirements; Supported Hardware - Cisco Catalyst 4224 Release Notes

Introduction

Introduction
The Cisco Catalyst 4224 Access Gateway Switch is an Ethernet switching router that provides Voice
over IP (VoIP) gateway and IP telephony services. It is designed to be part of a centralized
Cisco CallManager application.

System Requirements

This section describes the system requirements for Cisco IOS Release 12.1(5)YE3 and includes the
following sections:
•
•
•
Memory Recommendations
Table 1 Minimum Memory Recommendations for the Cisco Catalyst 4224 Access Gateway Switch
Platforms Image Name
Cisco c4224
IP Plus (standard)
IP Plus / FW
IP Plus / IPsec 56
IP Plus / IPsec 56 / FW
IP Plus / 3DES
IP Plus / 3DES / FW

Supported Hardware

Cisco IOS Release 12.1(5)YE3 supports:
•

Determining the Software Version

To determine the version of Cisco IOS software running on your Cisco Catalyst 4224 Access Gateway
Switch, log in to the Cisco Catalyst 4224 Access Gateway Switch and enter the show version EXEC
command:
Introduction
2
Memory Recommendations, page 2
Supported Hardware, page 2
Determining the Software Version, page 2
Cisco Catalyst 4224 Access Gateway Switch
Router> show version
Cisco Internetwork Operating System Software
IOS (tm) 12.1(5) Software (c4224-isx3-mz), Version 12.1(5)YE3, RELEASE SOFTWARE
Flash
Memory
Software Image Recommended
c4224-isx3-mz 32 MB Flash
c4224-io3sx3-mz 32 MB Flash
c4224-isx356i-mz 32 MB Flash
c4224-io3sx356i-mz 32 MB Flash
c4224-ik2sx3-mz 32 MB Flash
c4224-ik2o3sx3-mz 32 MB Flash
DRAM
Memory Runs
Recommended From
64 MB DRAM RAM
64 MB DRAM RAM
64 MB DRAM RAM
64 MB DRAM RAM
64 MB DRAM RAM
64 MB DRAM RAM
OL-1798-01