Cisco MGX 8850 PXM45 Release Notes page 109

Cisco WAN Manager Release 11.0.10
The product documentation for the Cisco WAN Manager (CWM) network management system for
Release 11.0.10 is listed in
Table 37 Cisco WAN Manager Release 11.0.10 Documentation
Title
Cisco WAN Manager Installation Guide for Solaris 8,
Release 11
Cisco WAN Manager User's Guide, Release 11
Cisco WAN Manager SNMP Service Agent,
Release 11
Cisco WAN Manager Database Interface Guide,
Release 11
Cisco MGX 8850 (PXM45) Multiservice Switch Release 3.0.10
The product documentation for the installation and operation of the MGX 8850 Multiservice Switch for
Release 3.0.10 is listed in
Table 38 Cisco MGX 8850 (PXM45) Multiservice Switch Release 3.0.10 Documentation
Title
Cisco MGX 8850 (PXM45 and PXM1E) Hardware
Installation Guide, Release 3
Cisco MGX 8830, MGX 8850 (PXM45 and PXM1E) and
MGX 8950 Command Reference, Release 3
Cisco Frame Relay Software Configuration Guide and
Command Reference for the MGX 8850 FRSM12 Card,
Release 3.0.10
Cisco MGX 8850 (PXM45) and MGX 8950 Software
Configuration Guide, Release 3.0.10
Cisco MGX and SES PNNI Network Planning Guide for
MGX Release 3.0.10 and SES Release 3.0.10
OL-2914-01 Rev D0, July 3, 2003
Table 37.
Description
Provides procedures for installing Release 11 of the CWM network
management system and Release 5.4 of CiscoView.
Describes how to use the CWM Release 11 software, which consists
of user applications and tools for network management, connection
management, network configuration, statistics collection, and security
management.
Provides information about the CWM Simple Network Management
Protocol Service Agent, an optional adjunct to CWM that is used for
managing Cisco WAN switches using SNMP.
Provides information about accessing the CWM Informix OnLine
database that is used to store information about the network elements.
Table 38.
Release Notes for Cisco MGX 8850 (PXM45), MGX 8850 (PXM1E), and MGX 8830, Software Release 3.0.10
Description
Describes how to install the MGX 8850 multiservice switch.
This guide explains what the switch does and covers site
preparation, grounding, safety, card installation, and cabling.
The MGX 8850 switch uses either a PXM45 or a PXM1E
controller card and provides support for both broadband and
narrow band service modules.
Describes how to use the PXM and AXSM commands that are
available for the MGX 8850, MGX 8950, and MGX 8830
switches.
Describes how to use the high-speed Frame Relay (FRSM12)
commands that are available for the MGX 8850 switch.
Describes how to configure MGX 8850 and MGX 8950 switches
with PXM45 controller cards to operate as ATM edge or core
switches. This guide also provides some operation and
maintenance procedures.
Provides guidelines for planning a PNNI network that uses the
MGX 8850 and the MGX 8950 switches and the BPX 8600
switches. When connected to a PNNI network, each BPX 8600
series switch requires a SES for PNNI route processing.
Documentation
109