Device Control; Electromagnetic Compatibility (Emc) - Maico easyTymp Operation Manual

2.7 Device Control

The user of the instrument should perform a subjective instrument check once a week
according ISO 8253-1. For annual calibration please see section 3.2.
See section 4.2.2 Test cavities for volume check.

2.8 Electromagnetic Compatibility (EMC)

WARNING
8108757 Rev. 3
Operation Manual easyTymp
Electrostatic discharge (ESD) according to IEC 61000-4-2.
Use the device
environment.
To avoid the risk of electric shock, this equipment must only
be connected to supply mains with protective earth.
The instrument fulfills the relevant EMC requirements. Avoid
unnecessary exposure to electromagnetic fields, e.g. from
mobile phones etc. If the device is used adjacent to other
equipment it must be observed that no mutual disturbance
appears.
Please also refer to EMC consideration in section 6.2.
11
only in an electrostatic controlled
15/11/2016