Customer Responsibility; Manufacturer's Liability - Maico easyTymp Operation Manual

2.2 Customer Responsibility

All safety precautions given in this operation manual must be observed at all times.
Failure to observe these precautions could result in damage to the equipment and injury
to the operator or subject.
The employer should instruct each employee in the recognition and avoidance of unsafe
conditions and the regulations applicable to his or her work environment to control or
eliminate any hazards or other exposure to illness or injury.
It is understood that safety rules within individual organizations vary. If a conflict exists
between the material contained in this manual and the rules of the organization using this
instrument, the more stringent rules should take precedence.
WARNING
NOTE: Customer responsibility includes proper maintenance and cleaning of the device
(see sections 3.2 and 3.3). Breach of the customer responsibility can lead to limitations
of Manufacturer's Liability and Warranty (see sections 2.3 and 3.1).

2.3 Manufacturer's Liability

Usage of the device in a way deviant from the intended use will lead to a limitation or
termination of the manufacturer's liability in case of damage. Improper use includes
disregarding the operation manual, the operation of the device by underqualified
personnel as well as making unauthorized alterations on the device.
8108757 Rev. 3
This product and its components will perform reliably only when
operated and maintained in accordance with the instructions
contained in this manual, accompanying labels, and/or inserts.
A defective product should not be used. Make sure all
connections to external accessories are snug and secured
properly. Parts which may be broken or missing or are visibly
worn, distorted, or contaminated should be replaced
immediately with
manufactured by or available from MAICO.
7
Operation Manual easyTymp
clean, genuine replacement parts
15/11/2016