Device Control
The user of the device should perform a subjective device check once a week according
ISO 8253-1. See Section 6.7 for a checklist.
For annual calibration please see Sections 2.6 and 3.1.
Electromagnetic Compatibility (EMC)
WARNING
8100456 Rev. 10
Electrostatic discharge (ESD) according to IEC 61000-4-2.
Use the device only in an electrostatic controlled
environment.
To avoid the risk of electric shock, this equipment must
only be connected to supply mains with protective earth.
The instrument fulfills the relevant EMC requirements.
Avoid unnecessary exposure to electromagnetic fields,
e.g. from mobile phones etc. If the device is used adjacent
to other equipment it must be observed that no mutual
disturbance appears.
Please also refer to EMC consideration in Section 6.5.
11
Operation Manual MA 41
24/04/2017